Type: Driver
File Name:
File Size: 24.6 MB
37 (4.56)
Downloads: 18
Supported systems: Windows XP/Vista/7/8/10, MacOS 10/X
Price: Free* (*Free Registration Required)

Download Now

To recommend a product, you must brother 5070 logged in. Yes Clean the terminals. High-voltage power supply PCB 2 Check the connections of the connector between the high- voltage power supply and the engine PCB are secured correctly.

Blown thermal fuse 2 Remove the fixing unit and measure the resistance of the thermal fuse. Is it open circuit? Yes Replace the fixing unit. Thermistor failure 3 Is the thermistor installed properly? No Reinstall the thermistor properly. Halogen heater lamp failure 4 Remove the fixing unit and measure the resistance of the halogen heater lamp. Yes Replace the halogen heater lamp. No Reconnect the connector securely. Yes Replace the laser unit. Blown thermal fuse 2 Remove the fixing unit and measure the resistance between the input connectors. Heater harness connection brother 5070 5 Is the heater harness connector connected to the low-voltage power supply PCB and fixing unit secure? No Reconnect the connectors securely. Be warned, however, that this operation will melt the fixing unit if the heater is hot.

Software bug 2 Does this problem appear when printing specific data or brother 5070 under a specific environment? Yes Inform the Brother office of the used specific data, printer condition and system environment.

Drum module Brother HL 5070 Compatible DR-3000 / DR-7000 black 20,000 copies

No Secure the ground wire correctly with the shoulder screw. Is it possible to print the data? For those defects, instruct the user to check brother 5070 'User Check' items described in each table. Even if the same image defect appears, the following procedures should be followed in the event of specific image defects. See also subsection 7. Conditions such as humidity, high temperatures, etc. Disable toner save mode within Printer Properties tab of the driver.


Possible cause Step Check Result Remedy Ground contacts Toner sensing failure printer side 1 Can printing be started with the brother 5070 unit and toner cartridge removed? Yes Check if the toner sensor is dirty and check the toner sensor connection.

Printer: Brother HLN OpenPrinting - The Linux Foundation

Toner sensing failure toner cartridge side 2 Is the problem solved when 4 or 5 pages are printed after the toner cartridge is replaced with a full brother 5070 Yes The wiper of the toner cartridge is defective.

Replace the toner cartridge. Drum connection failure 3 Are all the contacts between the drum unit and printer body connected correctly? No Clean contact electrodes both on the drum unit and in the brother 5070 body. Yes Replace the high- voltage power supply PCB.

Brother HL Toner, Brother HL Toner Cartridges

Dirt on the scanner window 6 Is there any dirt on the scanner window? Yes Brother 5070 it off with a soft clean paper. Laser unit failure 7 Is the problem solved after replacing the laser unit? High temperature and high humidity conditions can increase the amount of background shading. Possible cause Step Check Result Remedy Ground contacts Corona failure contact failure 1 Are the charge electrodes between the printer body and the drum unit dirty?


Yes Brother 5070 both electrodes. Yes Replace the drum unit with a new at your side. Brother Solution Center.

Home · United States · HLN; Downloads. HLN. Downloads.

Select Your Operating System (OS). Home · United Kingdom; HLN. Support & Downloads. HLN. Downloads.

Download the latest drivers, utilities and firmware. FAQs & Troubleshooting.

Other Drivers